Opel Frontera

since 1992 of release



Fronter's Opel
+ Opel Frontera brand Cars
+ Current leaving and service
- Engine
   Removal and OHC engine installation
   Removal and DOHC engine installation
   Engine dismantling
   Engine assembly
   Head of cylinders and valves
   Pistons and rods
   Block of cylinders
   Cranked shaft and bearings of a cranked shaft
   Camshaft drive
   Engine mounts
   Compression check
   Greasing system
   Works with system of greasing of the OHC/DOHC engine of 2.0 l
   Works with greasing system on the engine of 2.4 l
   Oil filter
   Oil radiator (if it is established)
   Pressure and oil temperature
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Manual box of gear shifting
+ Driveshafts, main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Governing bodies and operation
+ electric equipment Schemes




Oil radiator (if it is established)

GENERAL INFORMATION

If on the engine the oil radiator is established, it is under a forward part of the car. To reach an oil radiator, it is necessary to remove a front grille of system of cooling.

PERFORMANCE ORDER
1. Disconnect a weight cable from the storage battery.
2. Remove a guard of the pallet of a case.
3. Substitute capacity and merge oil, having turned out a stopper.
4. Remove a front grille. The oil radiator is visible below.
5. Disconnect oil pipelines from a radiator and remove a radiator. Watch to damaging a radiator.

Installation of an oil radiator is made in sequence, return to its removal. Observe the inhaling moments.
After installation fill in in the engine the established amount of impellent oil.