Opel Frontera

since 1992 of release



Fronter's Opel
+ Opel Frontera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Manual box of gear shifting
+ Driveshafts, main transfer
- Brake system
   Brake mechanisms of forward wheels
   Brake mechanism of back wheels
   Disk brakes of back wheels
   Main brake cylinder
   Air removal from brake system
   Vacuum amplifier of a brake
   Parking brake
   Pressure regulator
   Brake hoses of forward and back brake mechanisms
   Anti-blocking system (ABS)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Governing bodies and operation
+ electric equipment Schemes




Brake system

GENERAL INFORMATION

The brake system of the Frontera car from the middle of 1995 of release was completely processed. Thereof the description of brake system shares on two parts.
Forward wheels of the car have disk brakes. The bracket is formed by a support and the wheel cylinder. Details of a design are described below.
From the middle of 1995 of release of Frontera it is equipped with disk brakes of back wheels. The anti-blocking system is an additional complete set. Forward disks were increased till diameter of 280 mm. Disks have thickness of 26 mm.
Back wheels of the car to the middle of 1995 of release are equipped with drum-type brakes, after the specified term the disk brakes taken from the Monterey car, also let out by Opel firm. Diameter of disks of 313 mm, thickness of 18 mm. On inside of back disks there are blocks of the parking brake.
The brake system contains the vacuum amplifier located between a brake pedal and the main brake cylinder. Razryazheniye undertakes from the engine. The combination of the main brake cylinder to the vacuum amplifier was entered after processing of a design of brake system. The main brake cylinder and the vacuum amplifier are not subject to repair and in case of their damage are replaced.


Specifications


Remark

Separate characteristics are provided also in the text of Head and in case of obligation of their performance are allocated with a bold print

Brake system

Type
- to the middle of 1995 of release
Double-circuit, with disk lobbies and drum-type back brakes. In a contour of back brakes the valve of adjustment of pressure is established. The parking brake affects back brakes. There is a vacuum amplifier
- from the middle of 1995 of release
Double-circuit, with disk lobbies and back brakes. The parking brake affects separate brake shoes on back wheels. There is a vacuum amplifier
- cars with ABS
Double-circuit, with disk lobbies and back to brakes. The brake system copes the hydrounit. The parking brake affects separate brake shoes on back wheels
Brake mechanisms
- forward wheels
Disk with the floating brackets, being self-established
- back wheels
Drum-type or disk with floating brackets,
the being self-established
- parking brake
Affects back wheels.
Separate brake shoes from the internal
parties of back brake disks

Forward brakes

Disk brakes
Diameter
- to the middle of 1995 of release
- from the middle of 1995 of release

257 mm
280 mm
Thickness of a brake disk - after polishing:
- to the middle of 1995 of release
- from the middle of 1995 of release

20.97 mm
24.97 mm
Thickness of a brake disk - after wear:
- to the middle of 1995 of release
- from the middle of 1995 of release

20.6 mm
24.6 mm
Max. palpation of a brake disk:
- to the middle of 1995 of release, on diameter of 203 mm
- from the middle of 1995 of release, at distance of 29 mm from an external edge

0.13 mm
0.10 mm
Thickness of a brake shoe with a metal plate:
- the new
- minute admissible

10.5 mm
1.0 mm

Drum-type brakes of back wheels - to the middle of 1995 of release

Adjustment The being self-established
Internal diameter 254 mm
Max. admissible palpation 0.15 mm
Max. admissible internal diameter
after boring
255.5 mm
Width of a brake shoe 50 mm
Thickness of a brake shoe 5.0 mm
Minute admissible thickness of a slip 1.0 mm
Max. admissible gap of the piston of the wheel cylinder 0.15 mm

Disk brakes of back wheels - from the middle of 1995 of release

Execution

Integral disks
Diameter of a disk
Thickness of a disk
313.0 mm
18.0 mm
Minute admissible thickness of a disk after machining
16.97 mm
Minute admissible thickness of a brake shoe
16.60 mm
Max. admissible palpation of a disk (it is measured on distance of 22 mm from an external edge)
0.13 mm
Minute admissible thickness of a slip
1.0 mm
Internal diameter of a brake disk / drum
210.0 mm
Max. admissible internal diameter
211.4 mm

Main brake cylinder and amplifier of a brake

Gap in interface of the piston to the cylinder 0.04 - 0.125 mm, a limit (to the middle of 1995 of release)

0.15 mm
The amplifier of a brake, distance from a flange
till the end of a rod (till the end of 1995 of release)

18-18.2 mm
Return valve, hose of low pressure
The arrow on the valve indicates accession to a final collector
Brake liquid
Only established by Opel firm
Liquid replacement
Till the end of 1995 of release once a year, further each 2 years
Amount of filled-in liquid
about 0.4 l

Efforts of a tightening of carving connections, Nanometer

The moments of an inhaling of fixture are given also in the text of Head "Brake system".
Persistent bolt of the main brake cylinder (all models)

6
The pipeline to the main cylinder
12
Support to directing (directing fingers:)
- a forward brake, to the middle of 1995 of release
- a forward brake, from the middle of 1995 of release
- a back brake, from the middle of 1995 of release

32
74
44
Brake hose forward to the pipeline
19
Brake drum to a wheel nave
4
The union for air removal to the wheel cylinder
8
Lock-nut, brake pedal
34
The holder of a regulator of brake effort to the bridge
13
The main brake cylinder to the amplifier
13
The main brake cylinder to a tee
16
The brake pipeline to the hydrounit
15
Lock-nut a pusher of the amplifier of a brake (to the middle of 1995 of release)
27
Lock-nut, fork of a pusher of the amplifier of a brake
20
Lock-nut of a regulator of the parking brake
12
Nuts of fastening of the hydrounit
9
Regulator of brake effort to the holder
12
Nuts of fastening of the amplifier of a brake:
- to the middle of 1995 of release
- from the middle of 1995 of release

26
21
The wheel cylinder to a brake board
10
Hollow bolt of a brake hose to a support
35
Bolt of fastening of a tank
2
Top bolt of the forward sensor of angular speed of ABS
6
Bottom bolt of fastening of a cable of the ABS sensor
27
Bolts of fastening of a forward casing of a brake disk
13
Support fastenings:
- the forward
- the back

212
104
The holder of a brake hose back to the bridge
13
The holder of a cable of the parking brake to the bridge
9
The lever of the parking brake to a floor
20
Bolts of fastening of an asterisk of the ABS sensor
18
Bolts of fastening of a cable of the back ABS sensor
22
Bolts of fastening of the forward ABS sensor
9
Cap nuts of brake pipelines
15
Wheel fastening:
- with steel disks
- with disks from easy alloys

110
120