Fronter's Opel
+ Opel Frontera brand Cars
- Current leaving and service
Schedule of routine maintenance
Current leaving
Information on control
Check of levels of liquids
Check of a condition of tires and pressure in them
Replacement of impellent oil and oil filter
Check of level of liquid of system of hydrostrengthening of a wheel
Rotation of wheels
Check of a condition and replacement of hoses of an impellent compartment
Condition check, adjustment of a tension and replacement of a driving belt (only for engines with tension adjustment)
Check and adjustment of turns of idling of the engine and level WITH
Check of a condition of the battery, care of it and charging
Check and replacement of spark plugs
Check and replacement of candle VV of wires, covers and distributor begunka
Check of level of oil in a manual box of gear shifting and a transfer case
Check of level of lubricant liquid of differential of forward and back bridges
Check of fuel system
Check of functioning of system of cooling
Check of a condition of system of production of the fulfilled gases
Check of a condition of components of a suspension bracket and steering
Check of a condition of protective covers of power shafts of forward wheels
Make check of brake system and replacement of brake liquid with the subsequent pumping
Check of a condition and replacement of brushes of screen wipers
Filling of a cooler of system of cooling
Replacement of the fuel filter
Replacement of the RKPP transmission oil and transfer case
Replacement of lubricant liquid of differential of forward and back bridges
Replacement of a distributive belt of the engine
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Manual box of gear shifting
+ Driveshafts, main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Governing bodies and operation
+ electric equipment Schemes
|
Check of a condition and replacement of brushes of screen wipers
On brushes of screen wipers the road film over time collects, reducing efficiency of their work therefore brushes should be washed out regularly in soft cleaning solution.
Check
| PERFORMANCE ORDER |
| 1. Assemblies of screen wipers with brushes should look round regularly. If survey revealed existence of hardenings or cracks on rubber of brushes, replace brushes. If at survey it is not revealed anything unusual, wet a windscreen, include screen wipers, let's to them work a little and switch off them. A non-uniform trace from brushes on glass or strips on pure glass specify that it is necessary to replace brushes. |
| 2. During operation of the mechanism of screen wipers there can be a weakening of fixing nuts therefore they should be checked and necessarily to tighten each time at check of brushes (see. Head Onboard electric equipment for more detailed information on operation of the mechanism of screen wipers). |
|
Replacement of brushes of screen wipers
| PERFORMANCE ORDER |
| 1. Delay screen wiper assembly with a brush from glass. |
|
|
2. Press a fixing uvula inside and remove brush assembly from the screen wiper lever. |
| 3. If you want to replace only rubber of brushes, disconnect the brush end from a brush frame, then pull out a brush from a frame. |
| 4. Compare a new brush with old on length, a design etc. |
| 5. Establish a new brush into place, then insert its end into a brush frame to fix it. |
| 6. Establish brush assembly on the lever, then moisten glass and check screen wiper work. |
|
|
|
