Opel Frontera

since 1992 of release

Repair and car operation



Fronter's Opel
+ Opel Frontera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
- Coupling
   Removal and coupling installation
   Coupling repair
   Coupling installation
   Coupling check without removal
   Mechanism of switching off of coupling
   Air removal from hydrosystem
   Adjustment of height and free wheeling of a pedal
+ Manual box of gear shifting
+ Driveshafts, main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Governing bodies and operation
+ electric equipment Schemes



Adjustment of height and free wheeling of a pedal

GENERAL INFORMATION

Scheme of adjustment of provision of a pedal of coupling


The pedal should occupy a certain situation on height. Adjustment of a pedal is carried out according to иллюстр. Value of height of H should make 157-207 mm at the rug put on a floor. Without a rug the size decreases by 10 mm.
For adjustment of height weaken a lock-nut of a rod (2) and adjust a rod. A lock-nut tighten the moment of 28 Nanometers.
Further "H2" gap is regulated. The lock-nut is for this purpose weakened and the persistent bolt (1) rotates. H2 value should make 0.5 - 1.0 mm. For check the pedal undertakes a hand and moves forward and back. After adjustment tighten a lock-nut the moment of 20 Nanometers.
The course of a pedal of "H1" is in summary regulated. In the presence of a rug the pedal course against the stop in a floor should make 162 mm of a starting position.
After performance of all adjustments check coupling work as it is described in the Section coupling Check without removal.