Opel Frontera

since 1992 of release


Fronter's Opel
+ Opel Frontera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Manual box of gear shifting
+ Driveshafts, main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Diagnostics of malfunctions of onboard electric equipment
   Safety locks
   Fusible inserts (thermal relays)
   Chain breakers (thermal relays)
   Relay
   Lighting devices
   Removal and installation of a sound signal
   Servomotor of adjustment of range of light
   Screen wiper
   Cleaner of back glass
   Electric circuits
+ Governing bodies and operation
+ electric equipment Schemes



Servomotor of adjustment of range of light
GENERAL INFORMATION

The length of driving drafts at a servomotor is adjusted by the manufacturer. To change it it is impossible. Before removal of a servomotor establish the regulator switch at the included headlights in situation "0". After that switch off lighting.

Removal

The servomotor acts in film as follows:

PERFORMANCE ORDER
1. Rasstykuyte multicontact shtekerny connection.
2. Turn a servomotor located opposite to a back wall of a headlight, on a corner 45 ° counter-clockwise if it is a question of the right engine, or on 45 ° on an hour hand if it is a question of the left engine and take out the engine with driving drafts from sharovy support in a headlight.

Installation

PERFORMANCE ORDER
1. At installation completely enter driving drafts into a spherical support in a headlight.
2. Check correctness of installation and turn the right engine to the right, and left on the left in the headlight case.
3. In summary join shtekerny connection and to check work of a headlight and the adjustment mechanism.