| 1. The tools necessary for this work, include support for car maintenance in the lifted condition, a face key for an otdavaniye of a drain stopper, drain capacity, newspapers and pure rags. It is necessary to prepare also necessary amount of transmission oil (see. The section “Types and volumes of applied greasings and liquids”). |
| 2. Transmission oil merges in a hot condition (i.e. right after a trip on the car); from hot oil pollution easier are removed. Works are better for making in rubber gloves. |
| 3. To Poddomkratta the car and reliably establish it on support. Try to establish the car as it is possible more exactly. |
| 4. Place the necessary equipment under the car, trying not to concern hot components of final system. |
|
5a. Place drain capacity under transmission and remove a bulk stopper from a lateral part of transmission. Weaken a drain stopper. The opening stopper for plum of oil of a transmission of MSG is from the bottom party on an intermediate case, in a place shown on иллюстр. |
|
5b. The transmission of MUA has two drain stoppers shown on иллюстр. At plum both stoppers turn away. |
| 6. Carefully remove a drain stopper. Try not to burn thus hot oil. |
| 7. Let's to oil flow out completely. Carefully clear a drain stopper, then establish it and reliably tighten. |
| 8a. Read Section instructions Check of level of oil in a manual box of gear shifting and a transfer case and fill transmission by new oil, then establish a cover of a bulk mouth and reliably tighten it. |
|
8b. Arrangement of jellied jams of a transmission of MSG. There is only one opening. |
|
8c. Arrangement of jellied jams (2 jams) MUA transmissions. At check of level of oil both stoppers turn away. |
| 9. Lower the car on the earth. Having passed the first some kilometers, check, whether the drain stopper proceeds. |
