Opel Frontera

since 1992 of release



Fronter's Opel
+ Opel Frontera brand Cars
- Current leaving and service
   Schedule of routine maintenance
   Current leaving
   Information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them
   Replacement of impellent oil and oil filter
   Check of level of liquid of system of hydrostrengthening of a wheel
   Rotation of wheels
   Check of a condition and replacement of hoses of an impellent compartment
   Condition check, adjustment of a tension and replacement of a driving belt (only for engines with tension adjustment)
   Check and adjustment of turns of idling of the engine and level WITH
   Check of a condition of the battery, care of it and charging
   Check and replacement of spark plugs
   Check and replacement of candle VV of wires, covers and distributor begunka
   Check of level of oil in a manual box of gear shifting and a transfer case
   Check of level of lubricant liquid of differential of forward and back bridges
   Check of fuel system
   Check of functioning of system of cooling
   Check of a condition of system of production of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts of forward wheels
   Make check of brake system and replacement of brake liquid with the subsequent pumping
   Check of a condition and replacement of brushes of screen wipers
   Filling of a cooler of system of cooling
   Replacement of the fuel filter
   Replacement of the RKPP transmission oil and transfer case
   Replacement of lubricant liquid of differential of forward and back bridges
   Replacement of a distributive belt of the engine
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Manual box of gear shifting
+ Driveshafts, main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Governing bodies and operation
+ electric equipment Schemes




Check of a condition of components of a suspension bracket and steering

GENERAL INFORMATION


Remark

Components of a steering drive and suspension bracket should be checked regularly. The worn-out or damaged components of a suspension bracket and a steering drive can serve as the reason of excessive and dangerous wear of tires, deteriorations of running characteristics and controllability the car and to fuel consumption increase. For more detailed information on components of a suspension bracket and system of a steering address to Head the Suspension bracket and a steering.


Check of shock-absorbers

PERFORMANCE ORDER
1. Park the car on an equal platform, switch off the engine and cock the parking brake. Check pressure in tires.
2. Press one of car corners, then release it, paying attention to body movement. It should cease to shake and rise in a starting position after one or two musclemen.
3. If the car continues to be shaken or did not come back to a starting position, the possible reason of it is the worn-out or weakened shock-absorber.
4. Repeat the procedure described above for each of three remained corners of the car.
5. To Poddomkratta the car and reliably establish it on support.
6. Examine shock-absorbers on existence of signs of leakage of hydraulic liquid. The easy film of liquid is not at the bottom for concern. In case of detection of leak make sure that liquid follows from the shock-absorber, instead of from where still. If it nevertheless leak from the shock-absorber, replace shock-absorbers in pair on one axis (or all four).
7. Check reliability of installation and integrity of shock-absorbers. Check the top support on existence of damages and wear signs. In case of detection of those replace shock-absorbers.
8. In case of need replacements of shock-absorbers, address for instructions to Head the Suspension bracket and a steering. Always replace both components on one axis, otherwise there can be a threat of safety of the car. If it is possible, try to replace all four components in a set.

Check of a condition of system of a steering and suspension bracket

PERFORMANCE ORDER
9. Examine components of system of a steering on existence of damages and deformations. Look for signs of leakage of the liquid, the damaged laying, protective covers and shtutserny connections.
10. Clear the bottom end of a rotary fist. Ask the assistant to grasp bottom edge of a wheel and to shake it, and at this time watch movement of the spherical support connecting a rotary fist to the lever. Examine protective covers of spherical support on existence of gaps. If you find люфт or it is necessary to replace the torn or proceeding protective covers, a spherical support (support).
11. Grasp each of forward wheels for forward and back edges and try to turn it a first line inside, and back outside to check existence люфта in a steering drive. If it is found люфт, check, whether weakened fastenings of the steering mechanism and hinges of steering drafts. If weakened fastenings, tighten them. If weakened steering drafts, worn-out hinges (check at first reliability of a tightening of nuts) can be the reason. Additional information on system of a steering and a suspension bracket can be found in Head the Suspension bracket and a steering.