| 1. Check should be made at the cold engine therefore it is better to be engaged in it before the first trip for the present day or not earlier than in three hours after engine switching off. Check a condition twist release systems, beginning from the engine and finishing a cut of an exhaust pipe. In an ideal this check should be carried out at the car lifted on the winch when from below to it there is a free access. If the winch is inaccessible, поддомкратьте the car and reliably establish it on support. |
|
|
2. Check pipes and trumpet connections on existence of signs of leaks, strong corrosion and damages. Examine rubber подвесы systems of production of the fulfilled gases on existence of cracks. Check a condition and reliability of fastening of all brackets and подвесов systems. |
| 3. At the same time examine the car bottom on existence of holes, the corrosion, the dispersed seams and the other defects allowing penetration of fulfilled gases in salon of the car. Close up all openings suitable hermetic. |
| 4. Release system, especially its support and подвесы, often are a source of a roar and other unpleasant sounds. Shake and pull pipes, exhaust silencers and catalytic converter. If these components adjoin to elements of a body or suspension bracket details, replace fixture of system of release. |
| 5. Survey of an internal surface of an exhaust pipe allows to define the current working state of the engine. The structure of deposits in a pipe speaks about quality of settings of the engine. If the pipe from within black and smoked, it can indicate that it is necessary to check fuel system carefully. |
