Opel Frontera

since 1992 of release



Fronter's Opel
+ Opel Frontera brand Cars
- Current leaving and service
   Schedule of routine maintenance
   Current leaving
   Information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them
   Replacement of impellent oil and oil filter
   Check of level of liquid of system of hydrostrengthening of a wheel
   Rotation of wheels
   Check of a condition and replacement of hoses of an impellent compartment
   Condition check, adjustment of a tension and replacement of a driving belt (only for engines with tension adjustment)
   Check and adjustment of turns of idling of the engine and level WITH
   Check of a condition of the battery, care of it and charging
   Check and replacement of spark plugs
   Check and replacement of candle VV of wires, covers and distributor begunka
   Check of level of oil in a manual box of gear shifting and a transfer case
   Check of level of lubricant liquid of differential of forward and back bridges
   Check of fuel system
   Check of functioning of system of cooling
   Check of a condition of system of production of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts of forward wheels
   Make check of brake system and replacement of brake liquid with the subsequent pumping
   Check of a condition and replacement of brushes of screen wipers
   Filling of a cooler of system of cooling
   Replacement of the fuel filter
   Replacement of the RKPP transmission oil and transfer case
   Replacement of lubricant liquid of differential of forward and back bridges
   Replacement of a distributive belt of the engine
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Manual box of gear shifting
+ Driveshafts, main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Governing bodies and operation
+ electric equipment Schemes



Soap2 day

Current leaving and service

GENERAL INFORMATION

Introduction

This Head is made to help the amateur mechanic to support the car in a condition of maximum efficiency of operational parameters, profitability, safety and reliability. Further you will find the full schedule of procedures of routine maintenance of the car, and also the Sections devoted to the description of service of its separate systems in Head. Descriptions of visual checks, adjustments are included in Sections, replacements of components and other good advice. Illustrations with types of an impellent compartment and the car bottom will help to define a site of separate components. Serving the car according to the kilometrazhno-time schedule and following the detailed instructions provided below, you receive the accurate program of the service, capable to provide long and reliable service of your car. Remember that this plan is exhaustive, and performance of its separate points and neglect others will not give expected result.

Specifications

Sizes and weight (standard data)


Length dimensional:
  – Frontera Sport
  – Frontera

4038 mm
4480 mm
Width dimensional:
  – Frontera Sport
  – Frontera

1780 mm
1728 mm
Height dimensional (without loading):
  – Frontera Sport
  – Frontera

1698 mm
1645 mm
Base:
  – Frontera Sport
  – Frontera

2330 mm
2760 mm
Track ahead:
  – Frontera Sport
  – Frontera

1485.5 mm
1440 mm
Track behind:
  – Frontera Sport
  – Frontera

1490 mm
1445 mm

Types and volumes of applied greasings and liquids

Fuel - unleaded gasoline
(the electronic system of tracking a detonation changes an ignition advancing according to the filled fuel)
Not worse AI-95 (it is possible also AI-91,
thus do not give to the engine
big loadings)
Diesel engines - tsetanovy number
49
Fuel tank
80 l
Impellent oil
Petrol engines - mineral, semi-synthetic or synthetic oil
SG on API or A2-96 on ACEA
SG on API or A3-96 on ACEA
Diesel engines semi-synthetic or
synthetic oil
CD on API or B3-96 on ACEA
Volume
 at replacement (with the filter):
  – the engine of 2.0 l to the middle of 1995 of release
  – the engine of 2.4 l to the middle of 1995 of release
  – the engine of 2.0 l from the middle of 1995 of release
  – DOHC engine of 2.2 l

4.5 l
5.5 l
5.0 l
5.0 l
 at new filling of oil
Approximately on 0.3 l it is more
 oil replacement without the filter
Approximately on 0.25 l it is less
Difference between “Min” and “Max” marks
1.0 l
Manual transmission: Impellent oil, see above
  – MSG type, box of transfers / transfer case
  – MUA type, transmission case
  – MUA type, transfer case

4.4 l
2.8 l
1.4 l
Peredny Bridge:
special liquid No. 19 42 382 or gipoidny oil
  – Frontera five-door models
  – Frontera Sport three-door models

GL-5 on APISAE 90 or 80W-90
1.7 l
0.9 l
Zadny Bridge:
special liquid No. 19 42 382
  – with usual differential
  – with the blocking differential

See. Peredny Bridge.
2.4 l
1.9 l
Hydraulic booster of a steering
1.0 l, Dexron III liquid
Cooling system:
  – the engine of 2.0 l to the middle of 1995 of release
  – the engine of 2.4 l to the middle of 1995 of release
  – the engine of 2.0 l from the middle of 1995 of release
  – DOHC engine of 2.2 l

6.2 l
7.8 l
8.3 l
8.3 l
Composition of cooling liquid
Brake system
0.4 l, DOT-4, SAE - J1703

Specifications

Verifying and adjusting parameters of the engine

The engine of 2.0 l till 1995 of release
Gaps in valves
Are not regulated. There is a hydrojack
Corner of the closed condition of contacts
Electronic regulation
Ignition moment
from 8 ° to 12 ° to VMT idling
Spark plugs
According to the catalog of the manufacturer
Distance between electrodes
0.7-0.8 mm
Number of turns of idling
720-880 rpm
Concentration
FROM 0.4 %
Pressure of compression
Difference between pressure in cylinders no more than 1 bar
Engine of 2.4 l
Valves
Yoke with the hydrojack. A tightening on 1 turn after repair
Corner of the closed condition of contacts
Electronic regulation
Ignition moment
Electronic regulation
Spark plugs
According to the catalog of the manufacturer
Distance between electrodes
0.7-0.8 mm
Number of turns of idling
  – from a manual transmission
  – with automatic transmission

820-880 rpm
720-780 rpm
Concentration WITH
Electronic regulation
Pressure of compression
See above
The engine of 2.0 l from the middle of 1995 of release
Gaps in valves
Are not regulated. There is a hydrojack
Corner of the closed condition of contacts
Electronic regulation
Ignition moment
It is regulated by injection system
Spark plugs
According to the catalog of the manufacturer
Distance between electrodes
0.7-0.8 mm
Number of turns of idling
720-880 rpm
Concentration WITH
It is regulated automatically
Pressure of compression
Difference between pressure in cylinders no more than 1 bar
The engine of 2.2 l from the middle of 1995 of release
Gaps in valves
Are not regulated. There are hydrojacks
Corner of the closed condition of contacts
Electronic regulation
Ignition moment
Electronic regulation
Spark plugs
According to the catalog of the manufacturer
Distance between electrodes
0.7-0.8 mm
Number of turns of idling
700-1000 rpm
Concentration WITH
It is regulated automatically
Pressure of compression
Difference between pressure in cylinders no more than 1 bar

Driving belt

The engine of 2.4 l to the middle of 1995 of release
Length
depends on the equipment and an arrangement
Driving belt of the generator:
  – length
  – width
  – belt tension:
     • the new
     • being in the use

925 mm
9.5 mm

450 N
250-300 N
Belt of a drive of the pump
hydraulic booster
Specify number of the engine and year of release
The engine of 2.0 l from the middle of 1995 of release
Length
The length depends on the equipment and an arrangement
Length:
  – standard execution
  – with the conditioner

1725 mm
2050 mm
Width:
  – all executions

21.36 mm
Tension
The automatic
DOHC engine of 2.2 l
Length
depends on the equipment and an arrangement
Length:
  – standard execution
  – with the conditioner

1725 mm
2050 mm
Width:
  – all executions

21.36 mm
Tension
The automatic
The engine of 2.4 l to the middle of 1995 of release
Length
depends on the equipment and an arrangement
Belt of a drive of the generator
  – length of a belt
  – width of a belt
  – belt tension:
     • the new
     • being in the use

888 mm
9.5 mm

450 N
250-300 N
Belt of a drive of the pump of the hydraulic booster:
  – length of a belt
  – width of a belt
  – belt tension

813 mm
9.5 mm
See above
In the presence of the conditioner:
  – length of a belt
  – width of a belt
  – belt tension

960 mm
9.5 mm
See above

Tires

Serial tires, depending on model:
  – to the middle of 1995 of release
P225/75 R15-102S (steel disks)
225/75 R15-104S (disks from easy alloys)
  – middle of 1995 of release
235/70 R16-105T (steel disks)
255/65 R16-109T (disks from easy alloys)
Pressure of air in tires:
Lobbies
The back
Tires P225/75 and 255/756
  – at loading in 3 persons - 3-дверный the car
  – at loading in 3 persons - 5-дверный the car
  – at full loading in 3-and 5-дверный the car

1.7 bar
1.7 bar
1.7 bar

1.7 bar
1.7 bar
2.4 bar
Tires 235/70 and 255/65:
  – at loading in 3 persons - 3-дверный the car
  – at loading in 3 persons - 3-дверный the car
  – at full loading
     • Frontera Sport
     • Frontera

2.0 bar
2.0 bar

2.0 bar
2.0 bar

2.2 bar
2.2 bar

2.5 bar
2.2 bar
Moment of an inhaling of bolts of fastening of a wheel:
  – steel disks
  – disks from easy alloys

110 Nanometers
120 Nanometers

Efforts of a tightening of carving connections, Nanometer

The OHC engine of 2.0 l till 1995 of release
Spark plugs
25
The OHC engine of 2.0 l from the middle of 1995 of release
Opening stopper for oil plum in the case pallet
55
Spark plugs
25
DOHC engine of 2.2 l
Opening stopper for oil plum in the case pallet
45
Spark plugs
25
Engine of 2.4 l
Spark plugs
40