Opel Frontera

since 1992 of release



Fronter's Opel
+ Opel Frontera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Coupling
+ Manual box of gear shifting
+ Driveshafts, main transfer
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Diagnostics of malfunctions of onboard electric equipment
   Safety locks
   Fusible inserts (thermal relays)
   Chain breakers (thermal relays)
   Relay
   Lighting devices
   Removal and installation of a sound signal
   Servomotor of adjustment of range of light
   Screen wiper
   Cleaner of back glass
   Electric circuits
+ Governing bodies and operation
+ electric equipment Schemes




Cleaner of back glass

GENERAL INFORMATION

Removal and installation of a cleaner of back glass depends on car model.

Frontera Sport

PERFORMANCE ORDER
1. Remove the cleaner lever, a brush and an internal cover of the driving electric motor (unscrew 2 screws).
2. Rasstykuyte shtekerny connection.
3. Unscrew the screw, a nut and plugs of the holder of the electric motor.
4. Remove from an electric motor shaft a nut, a washer and plugs and take out the electric motor. Fastening of the electric motor is shown on an illustration.

The screen wiper in sequence is established, to return to removal.

PERFORMANCE ORDER
1. Nuts of fastening of the electric motor tighten the moment of 6 Nanometers, a bolt and a nut of fastening of the holder the moment of 4 Nanometers.
2. Before installation of the lever of a cleaner and a brush include quickly and switch off the electric motor, having convinced that the shaft of the electric motor comes back to a starting position.

Frontera

PERFORMANCE ORDER
1. Remove internal facing of a door of a back and remove from the interior of a door of a cover of openings.
2. Remove the lever of a cleaner and a brush.
3. Unscrew a nut, remove a washer and the plug from a cleaner axis.
4. Rasstykuyte shtekerny connection.
5. Unscrew four bolts of fastening and remove the cleaner electric motor with driving drafts.
6. Remove drafts from the electric motor, unscrew three bolts of fastening and remove the electric motor from a plate.

The screen wiper in sequence is established, to return to removal.